LC Connector
MT-RJ Connector
1 answer
Mt rj
1 answer
Mt rj
1 answer
RJ Connector
Fiber optic connector according to the different transmission media can be divided into common silicon-based optical fiber single-mode and multimode connectors, as well as other issues such as plastic and as the transmission medium of optical fiber connector; connector structure can be divided into: FC,SC, ST, LC, D4, DIN, MU, the MT and so on .
1 answer
Should have 1 PCI-e x16 (164-pin) connector...
1 answer
On drivers side below the dash panel.
Black connector and it is called the ALDL or DLC.
Butch Billings, MT 59105
1 answer
One difference between an SC and an LC connector is that an LC connecter is smaller in size than an SC connector. Also, an LC connector is considered a latch connector, whereas an SC connector is considered to be a push-pull connector.
1 answer
In Optic Fiber Connectors,
SC Connector stands for "Subscriber Connectoror Standard Connector"
ST Connector stands for "Straight Tip Connector"
1 answer
Tamiya.
1 answer
68
2 answers
Not an OBDII, it is ODBI. the connector is the black "L" shaped connector near the battery.
Not an OBDII, it is ODBI. the connector is the black "L" shaped connector near the battery.
2 answers
SC stands for Subscriber Connector. It is a type of fiber optic connector that is commonly used in telecommunications and data networking applications. The SC connector is easy to install and offers low insertion loss.
2 answers
sc connector means subscriber connector and st connector means straight tip connector
1 answer
The UTP cable it uses an RJ-45 connector. For coaxial cable, it will be either an F connector or a BNC connector.
1 answer
notebook IDE connector= 44-pins
Desktop IDE connector= 40-pins
1 answer
ST is round metallic connector rather SC is square plastic connector.
ST and SC connector are two types of fiber optic connectors. For 10Base-F connection, the connector is usually ST type ;For 100Base-FX usually IS SC type connector. The core of the ST connector exposed and the SC'core is inside of the connector
1 answer
* Type of connector in which one side does the transmit and the other BNC does the receive.
www.emulex.com/support/glossary.htm * The TNC (threaded Neill-Concelman) connector is a threaded version of the BNC connector. The connector has a 50 Ω impedance and operates best in ...
en.wikipedia.org/wiki/TNC connector
1 answer
An RJ11 connector is a six-position two-conductor connector. An RJ9 connector is a term for a four-position, four-conductor connector that is often used to connect a handset to the base of a telephone.
1 answer
db connector represents D shape connector. No other fullform is there as connector Shape is D so it is known as db connector.
2 answers
The F Connector is a coaxial RF connector used for television. You can get help installing an F connector online from the electrical section of the 'About' website.
1 answer
Fluid Connector
1 answer
A barrel nut connector is a cylindrical push-and-twist connector for connecting thin coaxial cable.
1 answer
Mt. Fuji, Mt. Naka, Mt. Tokachi, Mt. Okuhotaka, Mt. Hidaka, Mt. Chugoku, The Japanese Alps, and someone can add on to this. :D
1 answer
The connector is "keyed" so that it only goes on the injector one way. Locate the key on the connector to be replaced then note how the wires go into the connector and put the wires on the replacement connector in the same orientation.
1 answer
China (9,300 Mt)
The United States (4,800 Mt)
India (2,200 Mt)
Russia (1,500 Mt)
Japan (1,100 Mt)
Germany (718.8 Mt)
Korea (600 Mt)
Iran (567.1 Mt)
Canada (547.8 Mt)
Saudi Arabia (532.2 Mt)
1 answer
the regular ATX has a 20 pin power connector, while the enhanced ATX power connector has 24 pin power connector.
1 answer
A XLR connector is an electrical connector used for audio, video, and stage lighting equipment. The come in a circular design with anywhere between three and seven pins.
1 answer
4500 mt = 4500000 kg
4500 mt = 4500000 kg
4500 mt = 4500000 kg
4500 mt = 4500000 kg
4500 mt = 4500000 kg
4500 mt = 4500000 kg
2 answers
A P3 connector stands for Phase 3 connector. It is a cable that is most frequently used for sound equipment such as speakers.
1 answer